Hmax 45,00 m
Qmax 55 m³/h
Design
Service-friendly, self-priming side channel pump in back pull-out design. Hygienic design; wetted components of stainless steel 316L with supreme surface finish quality thanks to electropolishing; open impeller; highly suitable for CIP/SIP routines; FDA-approved elastomers. Can be combined with all commercially available standardised motors thanks to drive shaft supported by separate bearings. Close-coupled design.
Applications
For hygienic applications in the food, beverage and pharmaceutical industries
Overview of technical data
| Type of impeller |
Open |
| Type of installation |
2 |
| Impeller material (EN standard) |
1. 4409 ( AISI 316L) |
| Type of bearing |
4 |
| Drive frequency |
3 |
| Maximum speed of rotation |
1. 750 min |
| Maximum flow rate |
55 m³/h |
| Suitable for drinking water |
Yes |
| Casing material (EN standard) |
1. 4409 ( AISI CF3M) |
| Minimum flow rate |
1 m³/h |
| Suction characteristics |
2 |
| Drive voltage |
Low voltage |
| Pump set location |
Dry installed |
| Heatable |
Yes |
| Max. permissible fluid temperature |
140 °C |
| Main applications |
Food, beverages and pharmaceutical industry |
| Type of installation |
Transportable; Stationary |
| Type of connection |
Screw- ended, flange |
| Type of lubrication |
5 |
| Type of drive |
Electric motor |
| Installation position |
1 |
| Shaft seal type |
Mechanical seal |
| Drive |
2 |
| Maximum head |
45, 00 m |
| Maximum rated pressure (discharge) |
10 |
| Minimum head |
3, 50 m |
| Nozzle position |
4 |
| Connection to power supply |
230/ 400V, 400/690 V, 3~ |